Products
STAINLESS
Cam Followers
Stainless steel that has superior anti-rust and anti-corrosion ability is adopted. This type of bearing is used when corrosion resistance is needed, for example, in clean room and vacuum environment.
MINIATURE TYPE
The outside diameter of the outer ring is small compared to the stud diameter. Therefore, the bearings are used in compact product design.
CFS..MA
STANDARD TYPE
HEXAGON SOCKET ON BOTH SIDES
CF..MAB ready-to-use: grease nipple installed,
grease filled
grease filled
HEXAGON SOCKET ON STUD HEAD
CF..3MA～CF..10-1MA
SCREWDRIVER SLOT ON STUD HEAD
CF..5M～CF..10-1M
ECCENTRIC TYPE
The bearing shaft’s mounting part and the bearing part are eccentric. It is possible to adjust the distance between the bearing and the track by turning the shaft.
HEXAGON SOCKET ON BOTH SIDES
CFH..MAB ready-to-use: grease nipple installed,
grease filled
grease filled
HEXAGON SOCKET ON STUD HEAD
CFH..5MA～CFH..10-1MA
SCREWDRIVER SLOT ON STUD HEAD
CFH..6M～CFH10-1M
TAP HOLE TYPE
The bearing has tap hole for piping, which can be used in a concentrated lubrication system.
SCREWDRIVER SLOT ON STUD HEAD
CFT..M
HEXAGON SOCKET ON STUD HEAD
CFT..MA
DISCONTINUED PRODUCTS
STANDARD TYPE
HEXAGON SOCKET ON STUD HEAD
CF..12MA～ SUBSTITUTE PRODUCTS:CF..MAB
HEXAGON SOCKET ON THREAD SIDE
CF..MB SUBSTITUTE PRODUCTS:CF..MAB
SCREWDRIVER SLOT ON STUD HEAD
CF..12M～ SUBSTITUTE PRODUCTS:CF..MAB
ECCENTRIC TYPE
As the stud is eccentric, minor adjustment in position can be done by simply rotating the stud.
HEXAGON SOCKET ON STUD HEAD
CFH..12MA～ SUBSTITUTE PRODUCTS:CFH..MAB
HEXAGON SOCKET ON THREAD SIDE
CFH..MB SUBSTITUTE PRODUCTS:CFH..MAB
SCREWDRIVER SLOT ON STUD HEAD
CFH..5M～ SUBSTITUTE PRODUCTS:CFH..5MA
CFH12M～ SUBSTITUTE PRODUCTS:CFH..MAB
